Kitchen Waste Dewatering Press - High-Quality Equipment from China Suppliers and Factory
Equipment Characteristics
1. Low operating cost
The screw press adopts the principle of physical squeezing and dewatering. No additional heat source is required in the process of dewatering, and it consumes very little energy compared with similar drying equipment.
2. Continuous operation with large processing capacity
The parameters of the spiral helix are analyzed by mechanical calculation, and special processes are used to increase the axial thrust, so as to completely solve the problems caused by slipping, bridge, return material, shaft reporting and other reasons that cannot work continuously, and greatly increase the processing capacity per unit time.
3. The moisture content of the slag is low
According to the data of moisture content, molecular water ratio, viscosity, fiber content, water absorption, toughness, organic or inorganic substances of different materials, calculate the parameters suitable for the material, and make full use of physical pressing to reduce the moisture content of extruded material.
4. Wear and corrosion resistant
The key parts of the screw press are sprayed with wear-resistant layer, and the surface of the screw screw blade is welded with a layer of alloy blade to increase wear resistance; the core parts are made of 304 stainless steel, which is acid resistant, alkali resistant and corrosion resistant, thus greatly extending the service life of the equipment.
5. No additional agents are required
The sieve with 0.3MM-1.0MM gap can be selected according to the properties of the material to be dehydrated. No flocculant or other agents need to be added in the dehydration process, so no additional cost is required, and no chemical components will affect the secondary utilization of the material.
Frequently Asked Questions (FAQ)
Q1: Why is the operating cost of the screw press so low?
The screw press uses physical squeezing and dewatering principles. Since it does not require an additional heat source during the process, it consumes significantly less energy compared to traditional thermal drying equipment.
Q2: How does the system prevent blockages and maintain continuous operation?
Through precise mechanical calculations, the design of the spiral helix increases axial thrust. This effectively eliminates common operational issues like slipping, bridging, material return, and shaft binding, enabling uninterrupted high-capacity processing.
Q3: Can the equipment handle materials with different moisture and fiber levels?
Yes. The parameters of the screw press are customized based on specific material properties (such as water ratio, viscosity, fiber content, and absorption) to optimize physical pressing and achieve the lowest possible moisture content.
Q4: What makes the screw press highly resistant to wear and corrosion?
Key components are treated with a wear-resistant layer, and screw blade surfaces are reinforced with alloy welding. Additionally, core components are constructed from high-grade 304 stainless steel, which resists acids, alkalis, and general corrosion.
Q5: Are chemical additives or flocculants necessary for dewatering?
No. The physical dewatering process relies on selecting the appropriate sieve gap (0.3mm to 1.0mm) according to the material's properties. No chemical agents are needed, keeping operating costs low and preserving material quality for secondary use.