China Suppliers Plastic Recycling Factory - Efficient Processing of Used Plastics into Quality Pellets
Wastewater Quality
Industry: Special ceramics
| Parameter | Unit | Inlet | Outlet | Remark |
|---|---|---|---|---|
| Flow | m³/h(d) | 40 | / | |
| pH | / | 7~8 | 7~8 | |
| Suspended solids | mg/l | 2000 | 200 | |
|
Heavy Metal Cr/Cu/Ni/Zn/Fe... |
mg/l | / | / | |
| Other | / | / | ||
| Moisture content of mud cake | % | ≤30 | ||
Frequently Asked Questions
What is the design flow rate for the special ceramics wastewater treatment system?
The system is designed to handle a wastewater flow rate of 40 m³/h(d).
What is the pH range of the wastewater before and after treatment?
The pH value of the wastewater remains stable and neutral, ranging between 7 and 8 for both the inlet and the outlet stages.
How efficient is the system at removing Suspended Solids (SS)?
The system significantly reduces Suspended Solids (SS) from an inlet concentration of 2000 mg/l down to an outlet concentration of 200 mg/l.
Are heavy metals like Cr, Cu, Ni, Zn, and Fe present in the wastewater?
Heavy metals including Chromium (Cr), Copper (Cu), Nickel (Ni), Zinc (Zn), and Iron (Fe) are associated parameters for special ceramics wastewater, though specific inlet and outlet limits are determined based on project-specific requirements.
What is the target moisture content of the mud cake after treatment?
The moisture content of the resulting mud cake is controlled to be less than or equal to 30% (≤30%) to ensure efficient sludge dewatering and disposal.