Leave Your Message

China Suppliers Factory for Processing Water in Plastics Recycling and Wastewater Management

Recycled plastic production involves transforming used or discarded plastic into high-quality plastic pellets using advanced machinery, including the dowel rod machine and granulator. This process, primarily implemented by leading China suppliers and factories, encompasses several key stages such as plastic washing, separation, and wet crushing. The concentration of pollutants found in wastewater during plastic recycling is significantly influenced by the type of waste plastics processed. Our innovative recycling solutions ensure an efficient and sustainable approach to plastic waste management, contributing to a cleaner environment. Choose our factory for top-notch recycled plastic products and superior service

    Wastewater Quality

    Industry Special ceramics
    Parameter Unit Inlet Outlet Remark
    Flow m³/h(d) 40 /
    pH / 7~8 7~8
    Suspended solids mg/l 2000 200
    Heavy Metal
    Cr/Cu/Ni/Zn/Fe...
    mg/l / /
    Other / /
    Moisture content of mud cake % ≤30

    Frequently Asked Questions (FAQ)

    Q: What are the main pollutants in special ceramics wastewater?

    The primary pollutants include high concentrations of suspended solids (SS) reaching up to 2000 mg/l, fluctuating pH levels, and potential traces of heavy metals such as Chromium (Cr), Copper (Cu), Nickel (Ni), Zinc (Zn), and Iron (Fe) depending on the raw materials used.

    Q: How is suspended solids (SS) reduction achieved in this wastewater treatment?

    Suspended solids are reduced from an inlet level of 2000 mg/l down to an outlet level of 200 mg/l. This is typically achieved through physical chemical processes such as coagulation, flocculation, sedimentation, and mechanical filtration.

    Q: Why is maintaining a stable pH of 7~8 important for ceramics wastewater treatment?

    A neutral pH range of 7~8 is optimal for the precipitation of heavy metals, ensures the efficiency of coagulants, and meets standard environmental discharge regulations without causing damage to local piping networks or ecosystems.

    Q: What is the significance of the ≤30% moisture content in the mud cake?

    A mud cake moisture content of 30% or less indicates efficient sludge dewatering. Lower moisture content reduces the overall volume and weight of the waste, significantly lowering transportation and disposal costs for the ceramic production facility.

    Q: Can the treated outlet water from special ceramics production be recycled?

    Yes, with an outlet suspended solids concentration of 200 mg/l and neutral pH, the treated water is often suitable for recycling back into initial clay preparation, washing, or dust suppression processes to promote sustainable water management.