China Kitchen Waste Dewatering Press - Efficient Suppliers & Factory Solutions for Effective Waste Management
Equipment Characteristics
1. Low operating cost
The screw press adopts the principle of physical squeezing and dewatering. No additional heat source is required in the process of dewatering, and it consumes very little energy compared with similar drying equipment.
2. Continuous operation with large processing capacity
The parameters of the spiral helix are analyzed by mechanical calculation, and special processes are used to increase the axial thrust, so as to completely solve the problems caused by slipping, bridge, return material, shaft reporting and other reasons that cannot work continuously, and greatly increase the processing capacity per unit time.
3. The moisture content of the slag is low
According to the data of moisture content, molecular water ratio, viscosity, fiber content, water absorption, toughness, organic or inorganic substances of different materials, calculate the parameters suitable for the material, and make full use of physical pressing to reduce the moisture content of extruded material.
4. Wear and corrosion resistant
The key parts of the screw press are sprayed with wear-resistant layer, and the surface of the screw screw blade is welded with a layer of alloy blade to increase wear resistance; the core parts are made of 304 stainless steel, which is acid resistant, alkali resistant and corrosion resistant, thus greatly extending the service life of the equipment.
5. No additional agents are required
The sieve with 0.3MM-1.0MM gap can be selected according to the properties of the material to be dehydrated. No flocculant or other agents need to be added in the dehydration process, so no additional cost is required, and no chemical components will affect the secondary utilization of the material.
Frequently Asked Questions
How does the screw press achieve low operating costs?
The screw press utilizes physical squeezing and dewatering principles. Because it requires no additional heat source during the process, it consumes very little energy compared to standard drying equipment.
Can the equipment run continuously without blockages?
Yes. By using advanced mechanical calculations to design the spiral helix and increase axial thrust, the system prevents common issues like slipping, bridging, returning material, and shaft reporting, ensuring continuous operation and high processing capacity.
How does the screw press ensure low moisture content in the final slag?
The equipment calculates specific parameters tailored to the unique properties of your material (such as viscosity, fiber content, water absorption, and organic/inorganic makeup) to optimize physical pressing and minimize moisture content.
What materials are used to prevent wear and corrosion?
Key components are protected with a sprayed wear-resistant layer and alloy-welded screw blades. The core parts are constructed from high-grade 304 stainless steel, which provides excellent resistance to acids, alkalis, and overall corrosion.
Do I need to add chemical flocculants during the dewatering process?
No, chemical agents are not required. Depending on the material properties, a sieve with a 0.3mm to 1.0mm gap is selected to complete the dewatering physically, which saves operational costs and keeps the discharged material chemically pure for secondary utilization.